Non Destructive Testing by Print Molding.

PLASTIFORM® is a process of non-destructive control via soft moulding used by metrologists, quality controllers and methods engineers as an economic, simple, rapid and reliable way of carrying out non-destructive control. With the PLASTIFORM® range you can control a groove, a thread root, a bearing distance or a radius … even in a small and even tiny orifice without having to cut or destroy the part.  With our Vision Kit, for example, examining and measuring the extraction of the soft moulding from the internal simple or complex form in a few seconds, even in the presence of a back draft, is child’s play

“PLASTIFORM®” is a soft product that enables its user to make print moldings of internal and/or external complex machined parts. The print can then be inspected and measured on an optical device. Soft, print molding has become an inspection process in itself: PLASTISCOPY.

Chemically based “PLASTIFORM®” products are packaged as two separate components. Polymerization occurs when equal portions of both components are mixed together. Before applying “PLASTIFORM®” products, the part or object must be cleaned of all impurities and stripped of all grease.

“PLASTIFORM®” products do not contain any chlorine, fluorine, nor sulfur. They are non-toxic and non-polluting and can be used without any particular restrictions.

POLYMERISATION  Polymerization time depends on the intrinsic characteristics of the 2 components. It may vary according to product temperature and room temperature, which should be approximately 20°C (68°F). Temperatures below 10°C (50°F) will not allow polymerization to occur, or the result may be incomplete.   SHRINKAGE Less than 1 µ/mm under normal conditions.   STABILITY  The chemical and physical properties of “PLASTIFORM®” ensure that the print will not deteriorate with time nor will it be affected by external conditions. Hence, the print can be kept as a reference.

YouTube  PLASTIFORM Cartridge presentation
YouTube  PLASTIFORM Manual Putties
YouTube  PLASTIFORM Rigid product
YouTube  PLASTIFORM MD-3P rigid product
YouTube  PLASTIFORM RGX with Double Cutter Blade
YouTube  PLASTIFORM Cartridge for roughness control
YouTube  PLASTIFORM Creation of a custom-seal
YouTube  PLASTIFORM for Large volumes