Braided copper contact Pads
4″ x 4″ Braided Copper Pad with Neoprene Insert
5″ x 5″ Braided Copper Pad
5″ x 7″ Braided Copper Pad
5″ x 7″ Braided Copper Pad witn Molded Vee-Block
5″ x 8-1/2″ Braided Copper Pad
5″ X 12″ Braided Copper Pad
Molded Vee-Block Pad Holder
Contact Plates and Blocks
Lead Contact Plate 1/4″
Lead Contact Plate 1/4″ D-Shape for Magnaflux Unit
Lead Contact Plate 1/2″
Contact Block
Spray Hoses and Nozzles
Spray Flow Nozzle (hand-held)
Hose, 4′ Long
Hose, 5′ Long
Hose, 6′ Long
Hose, 7′ Long
Hose, 8′ Long
Hose, 10′ Long
Hose, 12′ Long
Copper Conductors
Central Conductor Set (1/2″, 3/4″ and 1″ dia.)
1/8″ Dia. Central Conductor 18″ Long
1/4″ Dia. Central Conductor 18″ Long
1/2″ Dia. Central Conductor 18″ Long
3/4″ Dia. Central Conductor 18″ Long
1″ Dia. Central Conductor 18″ Long
Monitoring Devices and Test Pieces
  • Castrol Strip Type I and type II, Brass Finish
  • Field Indicators

Non-calibrated model has positive and negative fields in 10 divisions – Calibrated model has positive and negative Fields in 20 divisions reading in Gauss. Pocket size magnetometers used to detect residual magnetism after demagnetizing.   The calibrated model has positive and negative polarity in 20 divisions reading in Gauss.

  • Centrifuge Tubes

Centrifuge Tube ASTM, 100ml, 0-1.0 ml in 0.05 Increments for Fluorescent Materials Centrifuge Tube ASTM, 100ml, 0-1.5ml in 0.10 Increments for Color Contrast Materials Centrifuge Tube Stand

  • Digital Field Indicator MD-220

The MD-220 Magnetic Field Strength Meter is a portable handheld instrument with three and a half digit display that measures magnetic field strength.

The easy to read liquid crystal display indicates the magnetic field present at the hall effect sensor. The MD-220 Field Strength Meter is designed to measure, in gauss, the AC and DC fields as required during magnetic particle inspection.

Unlike analog magnetic field indicators, the Gould-Bass MD-220 is not damaged by intense magnetic fields, even though they may far exceed the range of the meter.

  •        Fully protected removable Hall Effect Probe,Meets AMS, ASTM & Mil Standards
  •        NIST Traceablilty assures meter accuracy
  •        Range of 0 to 199.9 Gauss, either polarity
  •        Battery or AC operation modes
  •        Includes rechargeable battery and charger
  •        Easy to read Liquid Crystal Display
  •        Reads AC and DC fields
  •        Meter accuracy within 2%
  •        Sample & Hold feature retains previous readings
  •        Durable Molded case withstands rugged NDT use
  •        Indicates field polarity
  •        Alignment fixture included

 

QQI Test Shims

Also known as “The Berthold Gauge”, this penetrameter has adjustable sensitivity and is McDonnell Douglas aircraft approved.

Magnetic Penetrameter

QQI-230 Test Shim (1 indication)
1/2″ circle diameter, 1/4″ bar length,
( 30%, .0006″ (15 micron) flaw depth

QQI-4230 Test Shim (4 indications)
1/4″ circle diameter, 1/4″ bar length,
( 30%, .0006″ (15 micron) flaw depth

QQI-234 Test Shim (3 indications)
1/2″, 3/8″ and 1/4″ circle diameter,
.0004″ (10 microns, .0006″ (15 micron) and .0008
(20 microns) flaw depth (20, 30, and 40%)

Steel Ring Test Block - ASTM-E-1444

Includes Test Graph — Also available Steel Ring Test Block – (+/- .002″ per P & W)

Shot Duration Timer SD-201

A portable, hand-held instrument that measures the time that an AC or DC magnetizing current flows through test parts on magnetic particle inspection machines.

The easy to read liquid crystal display reports the duration of current flow from 0 to 999.999 milliseconds and is accurate within 0.2%. Unlike other timers that only sense the internal machine timer setting or the contact closure time, the Gould-Bass SD-201 measures the actual length of time that the magnetizing current flows through the test/inspection part. (

Technical Data

  • Model Number: SD-201
  • Display Range: 0 to 999.00 milliseconds
  • Display Type: 6 Digit LCD 0.35 inch high
  • Accuracy: +/- 0.2% at 10 to 70 degrees Centigrade
  • Signal Requirements: 0.005 to 30 Volts AC/DC
  • Power Requirements: Rechargeable Battery 9V.
  • Battery Usage Time: 24 Hours Between Charges
  • Battery Recharge: Time 8 Hours (approx.)
  • Humidity Range:  0 to 100% (Non-condensing)

Dimensions:

  • Readout Unit Only 3-1/2″ Wide, 5-3/4″ Long, 1-3/4″ High
  • Lead Length 30″ Long
  • SD-201 in Polymer Case 10-1/4″ Wide, 7-1/2″ Long, 3″ High
  • Weight 800 g (1 lb., 15.2 oz.)

Recommended Calibration Interval

The SD-201 Digital Shot Duration Timer should be returned to the factory every six months for recalibration and routine inspection service. The recommended six month interval is based upon normal usage of intermittent readings. If the unit is used continuously, recalibration should be performed more often.

Operating Instructions

The SD-201 is Easy to Operate

  • For wet horizontal MPI machines, clamp a shunt (1000A-25mv, 1000A-50mv) between the headstock and tailstock. If a shunt is not available, a 1″ diameter by 18″ long copper rod can be substituted.
  • Attach the SD-201 test leads across the shunt terminals, or one lead to the headstock and the other lead to the tailstock if a copper conductor is used.
  • Turn the SD-201 power switch to the “ON” position.
  • Energize the MPI machine at maximum output in the contact mode.
  • The current shot duration is displayed on the LCD. The reading is in milliseconds to three decimal points, accurate within 0.2%
Powder and Blower Bulb

Powder Bulb

Light weigh, easy to use apray bulb. Cap removes for easy filling

Blower Bulb

Air puffer to blow away loose particles not being held bt a flux leakage.

Contact Clamp with 4/0 Connector

Spring loaded contact clamps are used in inspection of tubing, bars and other parts.

Split Coils

A three turn coil with a quick disconnect, made up from insulated 4/0 size flexible cable. The split coil is easily placed around or through a part and snap locked together. Other diameters can be supplied to special order. Please ask for details.

Available in:

  • 12″ diameter
  • 18″ diameter
  • 24″ diameter
Magnetizing Coils

Used for testing shafts, spindles, light weight axles, and many other small parts. The Coil operates from 115-Volt AC 60 Hz and can be used to magnetize or demagnetize. Either the wet or dry method may be used. Coil is fitted with an “on-off” switch.

Magnetic Yokes

Our Ferrous-Probe line of induced magnetic field products is often preferable to high-amperage prod units. Since no current flows through the inspection piece, you eliminate localized heating and arc burns which later can become failure defects.

Flexible Leg Yoke, model ES-X

The ES-X Ferrous-Probe flexible leg is a compact, lightweight, electro-magnetic particle inspection probe for critical surface crack inspection. It has shock resistant, safety orange epoxy plastic, that is reinforced with Fiberglass.

Strain relief system:

Equipped with Heyco spring system and stainless end plate to prevent cord rotation.

Cord attachment:

The cord attachment is equipped with Heyco strain reliefs and anodized end plates to prevent cord rotation. The ES-X has brass contacts rising from the core body within the cord box. This allows the electrical cord to be easily removed or replaced by simply unscrewing the leads from the brass contacts. This system prevents cord shorts doe to arcing between leads.

Switchbox:

The molded switch box is water resistant. The momentary on-switch is soldered to leads rising from the core body within the box. This allows the switch to easily be replaced and prevents any arcing.

Weight: 7 lbs.   voltage: 42/115/220 AC  HZ: 50/60, AMPS (in air):3.0/5.75/2.0 Lift capacity 15lbs @ 115v

Optional DC power supply available.

Fixed Leg Yoke, model ES-X

The ES-X Ferrous-Probe Fixed Leg is a compact, lightweight, electro-magnetic particle inspection probe for critical surface crack inspection. It has shock resistant, safety orange epoxy plastic, that is reinforced with Fiberglass. Unlike the flexible unit, this model’s legs are permanently fixed to one position and are also protected by the shock resistant epoxy.

Strain relief system:

Equipped with Heyco spring system and stainless end plate to prevent cord rotation.

Cord attachment:

The cord attachment is equipped with Heyco strain reliefs and anodized end plates to prevent cord rotation. The ES-X has brass contacts rising from the core body within the cord box. This allows the electrical cord to be easily removed or replaced by simply unscrewing the leads from the brass contacts. This system prevents cord shorts doe to arcing between leads.

Switchbox:

The molded switch box is water resistant. The momentary on-switch is soldered to leads rising from the core body within the box. This allows the switch to easily be replaced and prevents any arcing.

Weight: 7 lbs.   voltage: 42/115/220 AC  HZ: 50/60, AMPS (in air):3.0/5.75/2.0 Lift capacity 15lbs @ 115v

Optional DC power supply available.

Underwater Yoke, model Nautilus

The Nautilus Underwater flexible leg probe is a compact, lightweight, electro-magnetic particle inspection probe for critical surface crack inspection. It has shock resistant, safety orange epoxy plastic, that is reinforced with Fiberglass.

Strain relief system:

Equipped with Heyco spring system and stainless end plate to prevent cord rotation.

Cord attachment:

The cord attachment is equipped with Heyco strain reliefs and anodized end plates to prevent cord rotation. The ES-X has brass contacts rising from the core body within the cord box. This allows the electrical cord to be easily removed or replaced by simply unscrewing the leads from the brass contacts. This system prevents cord shorts doe to arcing between leads.

Switchbox:

The molded switch box is water resistant. The momentary on-switch is soldered to leads rising from the core body within the box. This allows the switch to easily be replaced and prevents any arcing.

Weight: 7 lbs.   Pulsed DC low voltage 24v, Meets or exceeds ASTM with min. lift @ 10 lbs.

PM-6 yoke, requires no power source

Weight: 1lb – 11 oz

Lift capacity – 50 lbs iht poles extended from 0 to 10.25″

Mechanical capacity – poles measure 6.5″ in length and 5/16″ in diameter.

For use with dry powder, wet visible or fluorescent