Since it’s introduction a few years ago, The Phasor XS versatility has been greatly improved thanks to the creation of new Phased Array probes designed to meet specific needs and/or new applications. We have compiled here the latest list of specialty probes and/or applications. Feel free to call us if you require further information on any of the products highlighted in this section. Some of these products will have links to YouTube for video presentations.
B.S. Phased Array Probe
Wear resistant straight beam contact PA probe featuring DGS sizing technology. Provides a nice solution for finding “off angle” defects by sweeping +/- 30 or +/- 20 degrees respectively. POD and productivity are dramatically improved! The first wear resistant straight beam contact Phased Array probe in the market featuring DGS sizing technology. DGS can also be utilized as an improved sizing tool for all angles in the sector scan. The unique probe design shows a significantly improved sound profile for dynamical focusing applications.
The ergonomic BS housing is unique on the market, offering comfortable handling over long inspection times. The highly wear resistant B.SPA16 probes offer the most productive and accurate flaw sizing with Phased Array probes. If you have large forging, casting, or billet testing, you cannot afford to be without these probes.
• B2SPA16: 2 Mhz/16 EL/1.5 mm pitch, PN 0069805,
• B4SPA16: 4 Mhz/16 EL/1.5 mm pitch, PN 0069806,
Flange face inspection
The Phasor XS provides all-in-one solution to inspection, reporting and archiving of results. Eliminates need to use complex, expensive scanning systems….Lightweight, portable Phased Array replaces bulky computer-based systems.A simple solution to Flange Face Corrosion Inspection…
Most petrochemical plants have pipe joints that are susceptible to corrosion and leakage
Current inspection techniques rely heavily on the time consuming disassembly of joints for visual inspection or the use of expensive, large, complex scanning systems
Phasor XS and Rhythm software combined provide all-in-one solution to inspection, reporting and archiving of results. Eliminates need to use complex, expensive scannning systems….Lightweight, portable PA replaces bulky computer-based PA systems. Phasor can be used in Conventional UT mode for verification and other inspections
Reduces cost from $700 per flange for visual inspection down to $175 per flange for PAUT for a savings of 75%. Inspect more flanges in less time during plant shutdown. Archived results increase productivity by planning work and providing comparisons for future shutdowns
Flange Face Inspection Kit:
PHASOR XS® 16/64 TOPVIEW with version 2.20 BLDG 27 or newer.
5MHz phased array probe with 16 elements and a pitch of 1mm. (GEIT Part # 115-000-015)
removable flat wedge capable of generating a 30 to 70 degree shear wave in the flange. (GEIT Part # 118-350-025)
5 MHz frequency integral phased array probe/wedge combination which operates at a and can generate a 30 – 70 degree shear wave into the flange. This combination shall have a space envelop small enough to fit between the nuts used to secure the flange studs. The minimum space envelop width is 0.61 inch. (GEIT Part # 115-000-743 picture above)
Section of a 4” raised face flange with simulated machined corrosion on sealing surface
SD memory card containing the setup files for 150#- 300# raised face flanges.
EPRI Qualified PDI phased Array probe kit
Manual Phased Array technique for Pipe Weld Inspection in Nuclear Power Plants
The Electric Power Research Institute (EPRI) has the charter to help insure member utilities that their plants are run safely and efficiently. Member utilities share the costs of developing the techniques and technologies to achieve this goal by funding EPRI for very specific technical areas; and one of these areas is nondestructive testing (NDT).
The Phasor XS phased array system, probes and procedures have been qualified to meet the EPRI Qualification in a method defined in section XI of ASME code. We now supply a special PDI probe kit. Through continuous testing and qualification, the Phasor XS has been issued a Performance Demonstration Qualification Summary (PDQS) by the Electric Power Research Institute (EPRI). As a result, the Phasor XS is qualified for manual Phased Array procedure for detection, and length sizing of ferritic and austentic piping, including Intergranular Stress Corrosion Cracking (IGSCC) for the nuclear power industry.
Phasor PDI Kit #022-900-307, Includes all items listed below.
- Phasor XS Instrument with PDI Piping Procedure and Set-up Files
- 3-day PDI Piping Procedure Training
- Phased Array Transducers Essential Variables (total of 5)
- Phased Array Wedge Essential Parameters (total of 6)
Composite inspection with Hardwater Phased Array probe
This probe design allows quick and easy scanning on composite surfaces. The encoder sampling interval can be adjusted to save C-scans (TOPVIEW) of 8” long all the way up to 90” if so desired. It however decreases the POD on smaller defects. When used exclusively with water as a couplant, the probe allows for very near surface inspections such as delaminations.
The bubbler box has a built in tube connection for water feeding of the probe face. It can also be used in a totally immersed condition. The use of water as a couplant also lowers the actual 5MHZ frequency of the probe down to 3 MHz. When used with the water feed tube, it allows to inspect vertical surfaces that do not require to be immersed.
- Phasor XS 16/64 topview, Phased Array Flaw detector
- Hardwater Phased Array probe, 64 element, 5MHz
- bubbler box with encoder
- Rhythm® Ultrasonic (UT) Inspection data management software
Composite inspection with Roto-Array probe
The power of an immersion C-scan in the palm of your hand!
A quick and easy way to inspect composites in the Aerospace industry, or to inspect wind turbine blades in the energy sector. Other inspections for aluminum skins and other metal structures for corrosion or flaw detection. The special rubber wheel conforms to curved surfaces for maximum scan coverage. A simple mist of water is sufficient as a couplant agent on the part’s surface. You can inspect in B-scan or encoded C-scan mode, ideal for various nondestructive testing applications, including voids, delaminations and disbonds.
GE Measurement and Control independently manufactures the RotoArray™ with connectors that mate with others phased array instruments. We work closely with key accounts in developing, testing, and bringing to market these exciting new products. There are two basic designs available; the Phasor XS version, and the Advanced version for other units that use Hypertronics and Ipex connectors. The Advanced version has three remote switches which allow you to remotely start scans, stop scans, and increment scans on capable instruments.
- Lightweight ergonomic design makes it easy to use, detachable side handles for either side
- Quick inspections using a thin film of water as medium of propagation
- Excellent acoustic performance similar to immersion inspection
- Allows for inspecting vertical surfaces, even upside down
- Transparent wheel makes it easy to purge air bubbles
- Unique direct drive encoder (non-encoding versions available)
- Hypertronics and Ipex connectors available for others Phased Array instruments.
- Owner serviceable with the optional service station
- Video based instruction and service manual (The RotoArray Digital guide)
Available RotoArray™ Formats:
2” wide (Pitch 0.8mm) 64 element phased-array, 5 MHz.
3.2” wide (Pitch 1.27mm) 64 element phased-array, 5 MHz.
For Wind turbine blades:
5” wide (Pitch 2mm) 64 element phased-array, 1 MHz.
5” wide (Pitch 4mm) 32 element phased-array, 0.5MHz
Railroad wheel profile inspection
Combining GE’s Phasor XS portable phased array flaw detector with a bubbler assembly containing a 64 element phased array probe, the user can display and capture a TopView C-Scan image of a wheel tread inspection.
Conventional ultrasonic inspection relies on individual probes with a fixed geometry and ultrasonic focus or a series of such probes mechanically manipulated to scan a region of interest. Ultrasonic inspection with Phased Array uses a single multiple element probe to achieve the same application result without the need for mechanical probe manipulation. This is made possible because the individual elements within the probe are driven by the electronics in sets that can be electronically scanned and focused at different ultrasonic depths in near real time. Phased Array provides full volumetric inspection of the area of interest on a rail wheel at higher throughput and without the complex mechanical motion of a conventional inspection system.
- PHASOR XS® 16/64 TOPVIEW Phased Array flaw detector
- Phased Array probe, 5MHz, 64elements, .058″pitch x .394″elv
- Handheld railroad wheel bubbler assembly to hold the probe
- Wheel section calibration standard
Corrosion mapping with DM phased array probe
The unique DM phased array probes developed for corrosion monitoring are multi-element arrays which provide comprehensive linear coverage AND excellent near surface resolution.
Corrosion Detection, Imaging and Digital Measurement with Phasor CV/DM
The Phasor CV/DM combines a phased array imaging device and a conventional flaw detector into one instrument, with a dual-receive phased array probe which allows significantly increased confidence in corrosion inspection data. The Phasor CV/DM provides a simple and elegant method for reliably monitoring corrosion, identifying corrosion pits, displaying meaningful images, and providing digital measurements.
It does this by using a specially developed phased array compression transducer, which provides 28 adjacent and discrete inspection probes to allow extensive linear coverage. This ensures that even the smallest corrosion pit is identified and evaluated. The corrosion software specially developed for the Phasor CV/DM displays results in an understandable and useful way, both in terms of digital data and imagery. An optional positional encoder provides precise linear location information for each scan.
The New Corrosion Software provides the ability to select and display:
- Thickness measurement in each beam
- Minimum thickness in a current view
- Minimum thickness recorded during a current scan, since the last re-set.
- The ability to freeze a Top View
- The availability of a conventional A-scan to confirm readings
AWS inspection with Phased Array probe
YouTube – Using Phased Array for AWS codes
While it is recognized that phased array technology is becoming more widespread and popular within various industries, it has not yet been specifically addressed by the AWS. It is now possible to align the Phasor XS with the current methodology prescribed in Clause 6, Part F, of the AWS D1.1, 2008 Code. This is achievable due to the well-established fact that an array transducer with the same physical properties of size, shape, and frequency, as a conventional monolithic transducer, will have identical acoustic properties.
We have a guideline procedure for the Phasor XS utilizing the sectorial and A-scan views. For the detection and interpretation of discontinuities in groove type welds and the associated heat affected zones (HAZ). Applicable part thickness range is from 5/16” to 8” inclusive of material thickness as prescribed by Part F of the AWS D1.1 – 2008 code.
For more details, please see the instructional video placed onto YouTube. YouTube – Using Phased Array for AWS codes
Gold bar inspection
Fast and Comprehensive Validation of Gold Bars, The Phasor XS phased array ultrasonic flaw detector is being used by major Gold traders to test the purity of the gold stored for its customers.
YouTube – Testing the Purity of Gold Bars with Phasor XS
This is an initiative taken to assure further peace of mind for a product which is already stringently assessed for integrity. Through regular inventory audits and a transparent chain of integrity, major gold traders are now able to guarantee that only the highest quality gold is purchased and stored. The introduction of state-of-the-art ultrasonic inspection will now verify the purity of every single stored gold bar.
Alan Hunscott, (shown here) Technical Support Manager of GE’s Inspection Technologies product line, explains how the equipment works, “Our Phasor XS uses phased array ultrasonics, the same technology as that used in medical diagnosis and foetal scanning. This relies on the computer-controlled excitation of each element in a multi-element probe to produce a focused, steerable, ultrasound beam. As a result, a single phased array probe, with say 64 elements can perform those inspection tasks normally requiring large numbers of conventional probes or multiple scanning passes. First of all this means that scanning is faster and the possibility of detection is much greater. However, perhaps the greatest benefit in this application is the presentation of the image. Unlike conventional ultrasonic images which are difficult to interpret, phased array produces simple images which are readily understood even by laymen with the minimum of training.”
“Our customers need every assurance that their gold bars contain only gold. Destructive examination is not an option but this ultrasonic non-destructive testing method has proved effective, efficient and fast. By working with first class partners in the precious metal industry and by using the latest GE technology to verify integrity and purity, we are setting new standards for quality.”
Path Scanner for DM corrosion mapping Phased Array probe
The special DM probe can be spring loaded into this small path scanner with rare earth magnetic wheels to reduce fatigue while rastering 2 inch wide C-scans. Designed for Phased Array Corrosion Mapping with the DM probe combined with the Phasor XS
Electronic rastering for 2 inch wide C-Scan
Ergonomic design reduces fatigue while scanning
Eliminates sensitivity to movement versus manual manipulation of probe
Spring loaded probe holder ensures consistent contact pressure
Optimized integrated couplant flow
Easily configurable; probe may be center or front mounted
Sealed encoder with integrated cable driver for signal integrity
Bulkhead cable terminations Maintains normal incidence on circumferential scans of piping
Ball bearing axles High quality environmental connectors
Rare earth magnetic wheels Will contact down to 2 in nominal pipe for circumferential OD scanning, or down to 14 in nominal pipe for circumferential ID scanning